The same window shown clear and frosted

PDLC Smart Film Kit

Small
$108.00
Skip to product information
The same window shown clear and frosted
  • The same window shown clear and frosted
  • Two-button remote in front of frosted glass, controller on the sill
  • Kit contents laid flat
  • Applying the film with a felt squeegee
  • Testing the finished window with the remote
  • Entry door and sidelights with frosted film
  • Living room window switched frosted
PDLC Smart Film Kit

PDLC Smart Film Kit

$108.00
Size

You love that window. You love the light it pours into the room. What you don't love is the feeling of being on display. ClearSwitch PDLC smart film ends that trade-off. It bonds to the inside of the glass you already have, and with one press of the remote it melts from a crisp, open view into a soft, private frost. Press again and the world comes back.

  • Crystal-clear views when you want the world in, soft frosted privacy when you don't
  • Transforms the windows you already own, with no replacement glass and no renovation
  • Low-voltage controller plugs straight into a standard wall outlet, no hard-wiring
  • Two-button wireless remote: no app, no Wi-Fi, no fuss
  • Private by default: if the power goes off, the glass stays frosted

In the box: switchable film panel in your size, edge connection strip, connection cable, low-voltage controller, mains power lead, two-button wireless remote, foam edge tape, microfiber cloth, felt-edge squeegee.

For smooth, flat glass. Not for textured, patterned or already-frosted glass.

One film, three modes

See Every Mode in Action

Clear, tinted and frosted. Same window, three different rooms.

1CLEAR

Clear

Full view in and out. The film practically disappears.

PRIVACY DAYLIGHT
2TINTED

Tinted

Cuts glare and harsh sun. You still see the world outside.

PRIVACY DAYLIGHT
3FROSTED

Frosted

No one can see in. Natural light still fills the room.

PRIVACY DAYLIGHT

Switch modes in a second with the remote or wall switch.

What's Really on Your Window

Four thin layers working together, plus everything you get in the box.

LAYER 01

Clear Protective Layer

Optically clear outer skin, so the film blends into your glass instead of sitting on top of it.

LAYER 02

Conductive Coating

A transparent conductive layer that spreads power evenly across the whole window, edge to edge.

LAYER 03

Liquid Crystal Core

The smart part. Aligned crystals give you a clear view. Scattered crystals turn the glass frosted.

LAYER 04

Self-Adhesive Back

Applies with water on the inside of the glass and peels off later without damaging the window.

IN THE BOX

Controller & Power Adapter

Plugs into a standard outlet. Comes with a wireless remote and a wall switch.

IN THE BOX

Complete Install Kit

Connectors, squeegee, application solution and a step-by-step guide. Everything you need.

The install

One Afternoon. No Contractor.

Four simple steps and your windows are smart.

Step 01: Measure

  • Measure the visible glass, not the frame
  • Measure width and height in two places
  • Use the smallest number

Step 02: Clean

  • Clean the glass really well
  • Remove all dust, grease and stickers
  • This is the secret to a perfect finish

Step 03: Apply

  • Spray the glass with the solution
  • Place the film and squeegee from the center out
  • Trim the edges and let it dry

Step 04: Connect

  • Connect the two wires to the controller
  • Plug the adapter into a wall outlet
  • Pair the remote and wall switch

Frequently Asked Questions

Straight answers to the questions we get the most.

How private is frosted mode?
Completely. In frosted mode no one can see shapes or details through the glass, from either side, day or night.
What happens if the power goes out?
The film turns frosted automatically when there is no power, so your privacy stays protected.
Does it make the room darker?
No. Frosted mode blocks the view, not the light. Your room stays bright with natural daylight.
Will it fit my windows?
It works on most standard single-pane, double-pane and tempered glass. It is not suitable for glass that is already frosted, textured or heavily tinted.
Do I need an electrician?
No. It runs on safe low voltage and plugs into a normal wall outlet. Most people install it themselves in an afternoon.
Do I need Wi-Fi or an app?
No. The remote and wall switch work right out of the box. No Wi-Fi, no app, no account.
Can I remove it later?
Yes. The film peels off cleanly without damaging the glass, so it works great for renters too.
Can people see in at night?
In frosted mode, no. In clear mode it works like a normal window, so switch to frosted in the evening for full privacy.